To install the RTC Launcher Client, follow the steps:

  1. Run the setup file
  2. Click the "Next" button, to proceed to the next setup page
  3. On the opened "Destination Folder" screen, choose the folder to that the RTC Launcher Client will be installed
  4. Click the "Next" button, to proceed to the next setup page
  5. On the opened "Configuration Settings" screen, fill the settings according to the table below
  6. Click the "Next" button, to proceed to the next setup page
  7. Click the "Install" button
  8. Wait until installation is completed
  9. Click the "Finish" button on the last setup page, to finish the installation

RTC Launcher Client installation wizard


The configuration settings:

Field Name

Description

Web Host Name

The host name and port associated with the Web Site.
If DNS Name was mapped to the current server, then FQDN can be set to the field.
(lightbulb) Example: rtclauncherweb.luware.com


Otherwise, FQDN or IP address of server (where service is installed) is set to the field.
(lightbulb) Example: rtclauncherweb.luware.com

Web Host Name should be with port specified if port is not equal to 80.

Internal Port Number

The TCP port number for the RTC Launcher Client Web application in IIS.
Example for http: 84
Example for https: 443

(info) After the installation the setting is stored in IIS

Api Host Name with http(s)

Url to the RTC Launcher API Service.

(lightbulb) Examples: 

  • http://rtclauncher01.dev.local:9000
  • https://rtclauncherapi.luware.com


After the installation the setting is not stored in settings. 

(warning) Changes must be done with setup only (reinstall or repair)

Protocol

Choose between HTTP and HTTPS protocols.
Note: Please ensure that you have entered in all the setups the same protocol.
(info) After the installation the setting is stored in IIS

Certificate Hash

The Certificate Hash of the server. The field appears only if https protocol is chosen.
(info) After the installation the setting is stored in IIS